Packaging Reels > 13” LOKREEL® Pro Anti-Static Component Packaging Reels

Advantek’s patented LOKREEL® Pro component packaging reels are ideal for shipment and storage of any component packaged in carrier tape. The LOKREEL® Pro high-impact injection molded polystyrene construction offers exceptional protection to devices. LOKREEL® Pros are sold and shipped disassembled in halves to minimize shipping cost and provide compact storage.

  • Shipped in halves to decrease shipping costs by up to 70%
  • “Neat-stacked,” high-density packing reduces needed storage space by as much as 60%
  • Halves confi guration offers flexibility in managing the different reel widths needed during production—from 8mm to 56mm
  • Assembles with simple twisting motion—no gluing or fasteners

Construction

LOKREEL® Pro halves are injection-molded using a specially formulated high impact polystyrene (HIPS). Antistatic agent is applied to RD series LOKREEL® Pros by emersion in solution. Re-use of this product may degrade the antistatic properties.

Configurations

Advantek LOKREEL® Pros have an outside diameter of 13” (330mm) and a 1/2” (13mm) diameter arbor hole. Reel halves are available in a variety of hub diameters and hub widths. Hub diameters include the standard 4” (102mm) hub suitable for most carrier tapes and the 7” (178mm) hub designed to protect devices contained in deeppocket and narrow pitch carrier tapes. Available hub widths include 4mm, 8mm, 16mm and 28mm. Any combination of these hub widths will combine to produce a reel for EIA standard carrier tape widths of 8, 12, 16, 24, 32, 44 and 56mm. The table below demonstrates LOKREEL® Pro half combinations and the reel widths they produce.

Reel Width (mm) LOKREEL® Pro Flange Combinations
8 4mm + 4mm
12 4mm + 8mm
16 8mm + 8mm
24 8mm + 16mm
32 16mm + 16mm
44 16mm + 28mm
56 28mm + 28mm

Shelf Life and Storage

We recommend that Advantek type RD Antistatic LOKREEL® Pros be used within 2 years of the date of manufacture. Type RC Conductive LOKREEL® Pros have an indefi nite shelf life. Store this product in its original packaging in a climatecontrolled environment where temperature ranges from 21° C +/- 17°C (70° +/- 30°F). Allow the product to stabilize at room temperature prior to use. The mechanical integrity of the product is not affected by humidity.

Part Numbers
Pro White Anti-Static Pro Black Conductive
Hub Width 4” Diameter Hub 7” Diameter Hub 4” Diameter Hub 7” Diameter Hub
4mm RD33004SW RD33704SW RC33004SW-A
8mm RD33008SW RD33708SW RC33008SW-A RC33708SW
16mm RD33016SW RD33716SW RC33016SW-A RC33716SW
28mm RD33028SW RD33728SW RC33028SW-A RC33728SW
Pro Blue Anti-Static Pro Black DBK
Hub Width 4” Diameter Hub 7” Diameter Hub 4” Diameter Hub 7” Diameter Hub
4mm RD33004SW-BL RD33704SW-BL RD33004DBK RD33704DBK
8mm RD33008SW-BL RD33708SW-BL RD33008DBK RD33708DBK
16mm RD33016SW-BL RD33716SW-BL RD33016DBK RD33716DBK
28mm RD33028SW-BL RD33728SW-BL RD33028DBK RD33728DBK

Material Properties of Antistatic LOKREEL® Pro
Property Typical Value Test Method/Standard
Tensile Strength 3500 PSI ASTM D 638
Elongation 40% ASTM D 638
Flexural Modulus 270,000 PSI ASTM D 790
Vicat Softening 100°C (212°F) ASTM D 1525
Specific Gravity 1.04 ASTM D 892
Surface Resistivity (ohms/square) Pro White and Pro Blue: <1012;
Pro Black Conductive: <105;
Pro Black DBK: ≥105, <1010;
ASTM D 257
Static Dissipative per
EIA 541

Note: The values presented for this product are typical laboratory data and may be changed without notice.



Embossed Carrier Tape SFT™ Complex Designs Basic Designs Interleaf Tape
Surftape® Bare Die Micro Thin
Cover Tapes Heat Activated Pressure Sensitive
Packaging Reels Jumbo Ultra Pro Lite Trimline Mini
Bands PROBAND® LOKBAND®
Barrier Bags DRYLOK® STATLOK®
Humidity Indicator Cards 1 Spot 3 Spot 4 Spot 6 Spot
Desiccant 1/6 Unit 1/3 Unit 1/2 Unit 1 Unit 2 Unit 4 Unit 8 Unit