Products > Barrier Bags > DRYLOK® 3410 Static Shielding Bag

 

DRYLOK® 3410 Static Shielding Bag

 

Our DRYLOK® 3410 Static Shielding/Moisture Barrier Bag is engineered to protect contents from electro-static shock and moisture. Its construction prevents punctures, safeguards static- and moisture-sensitive devices during transport and storage, and helps ensure that vacuum is maintained for up to 2 years.

DRYLOK® 3410 bags are available in several standard sizes designed to contain matrix trays, tubes and 13” shipping reels and custom sizes can be made to fi t the needs of nearly any project. When used with the Advantek® Desiccant and Humidity Indicator Cards, The DRYLOK® 3410 bags provide superior protection for Static- and moisture-sensitive devices

• Meets requirements of EIA 541 and IPC/JEDEC J-STD-033

 

Construction

DRYLOK® 3410 Static Shielding/Moisture Barrier Bags are constructed in three layers. This cross section depicts the layer order from top (outermose layer) to bottom (inside of the bag). These layers consist of a Polymer outer layer with anti-static coating and a polyethylene inner layer with anti-static coating with a center layer of Aluminum foil

Configurations

DRYLOK® 3410 Static Shielding/Moisture Bags are available in custom sizes or in several industry standard sizes designed for reels, matrix trays and tubes. Bags are offered in a 2-seal confi guration with a bottom fold or a 3-seal confi guration, each with our standard Advantek or your company’s printed logo.

Shelf Life and Storage

We recommend that DRYLOK® 3410 bags be used within 3 years from the date of manufacture. Store this product in its original packaging in a climate-controlled environment where temperature ranges from 20°C +/- 16°C (68°F +/- 29°F) and relative humidity is 50% +/- 30%

 

DRYLOK® 3410 Physical Properties
Poperty Typical Value Test Method/Standard
Thickness 3.8 mils +/- 10% N/A
Puncture Resistance >17 lbs. FTMS 101 MTH 2065
Seam Strength Pass MIL-PRF-81705E
MVTR ≤0.002 grams ASTM F 1249
Heat Sealing Conditions
Temperature
Time
Pressure

160°C - 180°C
0.4 - 2 seconds
30 - 60 PSI

N/A
N/A
N/A
DRYLOK® 3410 Electrical Properties
Surface Resistivity
Interior
Exterior

< 1012 ohms/square
< 1012 ohms/square

ASTM D 257
ASTM D 257
Static Decay < 2 seconds EIA 541
Static Shielding <20 volts EIA 541

Note: These values were developed from random samples taken from production material. We believe them to be typical for the product. However, actual values may vary somewhat from those depicted above. You should determine product suitability based upon your own internal criteria.


Embossed Carrier Tape SFT™ Complex Designs Basic Designs Interleaf Tapes
Cover Tapes Heat Activated Pressure Sensitive
Packaging Reels Jumbo Ultra Pro Lite Trimline Mini
Barrier Bags DRYLOK® STATLOK®
Bands PROBAND® LOKBAND®
Humidity Indicator Cards 1 Spot 3 Spot 4 Spot 6 Spot
Desiccant 1/6 Unit 1/3 Unit 1/2 Unit 1 Unit 2 Unit 4 Unit 8 Unit