Products > Barrier Bags > DRYLOK® 3000 Static Shielding/Moisture Barrier Bag


DRYLOK® 3000 Static Shielding/Moisture Barrier Bag


Our DRYLOK® 3000 Static Shielding/Moisture Barrier Bag is engineered to protect contents from electro-static shock and moisture. Its 6 mil construction prevents punctures, safeguards static- and moisture-sensitive devices during transport and storage, and helps ensure that vacuum is maintained for up to 2 years.

DRYLOK® 3000 bags are available in several standard sizes designed to contain matrix trays, tubes and 13” shipping reels and custom sizes can be made to fi t the needs of nearly any project. When used with the Advantek® Desiccant and Humidity Indicator Cards, The DRYLOK® 3000 bags provide superior protection for Static- and moisture-sensitive devices.

• 6.1 mil thick static dissipative nylon, aluminum foil, and static dissipative polyethylene provide a very low MVTR.

• Meets requirements of EIA 541 & IPC/JEDEC J-STD-033


DRYLOK® 3000 Static Shielding/ Moisture Barrier Bags are constructed in three layers. This cross section depicts the layer order from top (outermose layer) to bottom (inside of the bag). These layers consist of a static dissipative nylon outer layer and a static dissipative polyethylene inner layer with a center layer of metal foil.


DRYLOK® 3000 Static Shielding/Moisture Bags are available in custom sizes or in several industry standard sizes designed for reels, matrix trays and tubes. Bags are offered in a 2-seal confi guration with a bottom fold or a 3-seal confi guration, each with our standard Advantek hot-stamp or your company’s hot-stamped or flexographically printed logo.

Shelf Life and Storage

We recommend that DRYLOK® 3000 bags be used within 2 years from the date of manufacture. Store this product in its original packaging in a climate-controlled environment where temperature ranges from 20°C +/- 16°C (68°F +/- 29°F) and relative humidity is 50% +/- 30%.

DRYLOK® 3000 Physical Properties
Property Typical Value Test Method/Standard
Thickness 6.1 mils +/- 15% N/A
Puncture Resistance 17 lbs FTMS 101 MTH 2065
Seam Strength Pass MIL-PRF-81705D
MVTR <0.0003 grams ASTMF 1249
Heat Sealing Conditions

300°F - 400°F
0.6 - 4.5 seconds
30 - 70 PSI

DRYLOK® 3000 Electrical Properties
Surface Resistivity

< 1012 ohms/square
< 1012 ohms/square

ASTM D 257
ASTM D 257
Static Decay < 2 seconds EIA 541
Static Shielding < 20 volts EIA 541

Note: These values were developed from random samples taken from production material. We believe them to be typical for the product. However, actual values may vary somewhat from those depicted above. You should determine product suitability based upon your own internal criteria.

Embossed Carrier Tape SFT™ Complex Designs Basic Designs Interleaf Tapes
Cover Tapes Heat Activated Pressure Sensitive
Packaging Reels Jumbo Ultra Pro Lite Trimline Mini
Humidity Indicator Cards 1 Spot 3 Spot 4 Spot 6 Spot
Desiccant 1/6 Unit 1/3 Unit 1/2 Unit 1 Unit 2 Unit 4 Unit 8 Unit